Until now the lifting device seres eT-Hover-allround, -univac, -panel and -loop were a group of four. But their product family grew over the past few months. Three more series broaden the extended family now. We want to introduce them for you.
Yet the probably most known series is the eT-Hover-allround. Based on the basic horizontal or vertical handling devices of the multi talent, there are expansion options for rotating and / or pivoting. Depending on the vacuum components used in the application, such as suction plates and vacuum generators, these lifting devices can be used for loads up to max. 500 kg. The basic version can be converted individually and flexibly to fulfil a wide range of handling tasks. Equipped with a 2-circuit design, the eT-Hover-allround is also available as a battery-driven device for use construction sites.
The vacuum lifting device eT-Hover-univac is suitable for lifting and moving large-surface loads made of glass, wood and coated particle boards, as well as other materials such as stone, metal or plastic. By use of the device you can rotate loads manually around 360° endless and pivot them around 90°. Optionally you can pivot electrically with a lifting cylinder. In its standard version with four suction plates, the device can lift 360kg vertically and 500kg horizontally. With the corresponding extension arms and four additional suction plates, you can increase the maximum carrying capacity to 700 kg. Whether intended for interior design purposes such as handling of wood panels or for outdoor use during window installation, the battery-powered eT-Hover-univac is available both as construction lifting equipment as well as in the indoor version.
If flat loads or trapezodial profile up to 450kg have to be turned, the new eT-Hover-loop is the right choice. Even, vacuum tight plates out of metal, glass, wood or plastic with dimensions up to 3000 x 2000mm or trapezoidal profiles with a length of up to 14 m and a maximum width of 1.6 m can be turned over 180° with this lifting device by use of a linear drive. The cross beams can be moved on the main beam, so you can meet indiviual requirements..
The eT-Hover-panel is helpful when panels have to be lifted and/or moved horizontally. The devices are suitable for the horizontal transport of vacuum sealed plates like metal sheets, plastic boards, thick wood panels etc. The maximum carrying capacity depends on the frame and the equipment. Up to max. 4000 kg can be achieved.
The eT-Hover-modesty series lifting devices are suitable for the transport of vacuum-tight flat loads such as glass panels, metal sheets, plastic or wooden panels. The lifting devices are low-key and function as an affordable alternative to similar devices with more equipment. With two handles the eT-Hover-modesty can be moved and positioned easily. Its telescopic traverses help to handle dimensions up to 2000 x 1500mm or 2400 x 1500mm with a maximum carrying capacity of 600 kg.
The eT-Hover-grid is suitable for the vertical transport of even, vacuum sealed plates like glasses, metal sheets, plastic boards, thick wood panels up to 3300 x 3000 mm. The maximum carrying capacity depends on the frame and the equipment. Up to max. 1.500 kg can be achieved.
The vacuum lifting device eT-Hover-element is suitable for the vertical transport and for the over-edge deposit of all thin, smooth and vacuum sealed plates like glasses, metal sheets and coated wood panels. A carrying capacity of up to 1000 kg can be achieved.
All vacuum lifting devices fulfill the DIN EN 13155.